Description
The PMA Neck Turning Tool is the best neck turner available today. You know why you need or want to neck turn, but with so many different models on the market, which do you choose? The factors determining your choice of neck turning tools essentially boils down to three key demands; ease and repeatability of adjustment, comfort of use and cut finish. This tool absolutely satisfies these demands.
Our neck turning tool does not use a course or fine drive screw to move the cutter towards or away from the mandrel. We don’t utilize an unnecessary micrometer or dial indicator. Nor do we rotate the mandrel on an eccentric which changes the center of the cut and has inconsistent adjustment. Our Model A neck turning tool simply adjusts by moving the mandrel toward or away from the stationary cutter with VERY minimal backlash. The Model A utilizes a super-fine 80TPI drive screw giving you .0002” adjustment between each mark, the marks have ample space between them allowing you to make adjustments as fine as .0001”. Tool does not include mandrel.
To see a video of this neck turning tool in use go to:
http://atthebench.pmatool.com/index.php/videos/73-hands-on-model-a-neck-turning-tool
Features:
· Adjustments of 0.0002” are easy to accomplish
o (0.0001” adjustments not out of the questions)
· Accepts PMA or Sinclair neck turning mandrels (sold separately)
o Also accepts K&M mandrels with the use of an adaptor
· Carbide cutter should never go dull
o Available in multiple cutter angles
1. 30˚ for a wide variety of cartridges including BR, PPC, RSAUM and 6.5x47
2. 30° for short-neck (<.250") cartridges such as 204 Ruger, 17 FB and various wildcats
3. 35˚ for 284 and WSM family cartridges
4. 40˚ for improved cartridges
5. 40 for short-neck (<.250") cartridges such as Dasher and various wildcats
6. 17.5˚ cutter for 30-06 family
7. 20˚ cutter for 308 family and 338 Lapua
8. 23˚ cutter for 223 family
9. 28˚ cutter for 22-250 (also work for 6mm Rem)
· Replacement cutters available separately
· Large ergonomic design
o Fits the hand well with good heft without being too heavy
o Size & shape keeps the tool easy to control under the torque of a case lathe or power drill
42 Reviews
-
Best out there
For me, this tool does the best, most consistent results, and I have tried 3 others from competitors. Wide cutter appears to be the key.
-
Best Neck Turning Tool I've used
I have a lot of neck turning equipment, I turn for .22cal, 6mm, 6.5mm, 7mm, .30cal and .33cal. This is the easiest and most accurate adjusting tool I have ever used. If I had one critique and its a small one, I would love for there to be something on the back of the tool I can chuck up in my lathe. I like to have my lathe turn the cases for me. I will make something to fit a tool holder for it but other than that, it is perfect.
-
Accurate, smooth, easy to adjust
This is the third one I purchased(20, 30, and 40 degree cutters) With their driver reasonable single pass cuts are quite feasible. The micrometer adjustment is accurate and the instructions are clear, concise, and helpful. Moreover, if neck turning with different brass manufacturers the adjustment to just even out the case necks is simple. In my case some brass needs to be at 0.132 and another needs to be at 0.146 to just even the necks.
-
excellent tool
Just getting into Benchrest and loading the PPC. I found the neck turner intuitive, easy to use, and exactly accurate. Thanks-
-
A superb neck turning tool
This tool fixes all the problem I have had with other tools. The idea to move the case and not the blade is phenomenal. I micrometer is superb. The attention to to detail is great, instructions are simple and clear, with all the practical tips needed. Technical and customer support is second to none. I highly recommend this tool.
-
Awesome Tool
Recently purchased a second turning tool even though setting the tool up for another caliber is easy. These are super easy to use, accurate, repeatable.
-
EPIC Tool!!!!
Precision made and easy to use. Very repeatable and smooth to operate. Thanks for the great customer service too. Not my first PMA tool and won’t be my last. Excellence in small business in all categories, buy with confidence these guys will help you take your shooting to the next level.
-
Neck Turner Gets 5 Stars
Have owned and used others but I prefer using the PMA Turner
-
PMA "Model A" Neck Turning Tool
I recently used the PMA Neck Turning tool to turn some new Winchester Brass/204 Ruger. First I ran the neck expander thru the necks, then lubed the turning mandrel and slowly ran the case neck up thru the cutter to the Mandrel stop. ( all cases were trimmed to length, necks chamfered inside and out before turning the necks.) I really like how easy the PMA Model A neck turner makes the job of turning the necks. I'm going to have to try it on some higher quality brass some time.