PMA Tuner 7/8-32 (4.2oz)

like it easy to tune

I just bought my third one! These work fantastic especially if you like to make changes with a tuner instead of with your load or seating. Most other designs have a screw to clamp in place and I’ve noticed changes with just different torques on the screw. I feel that the outer mass floating on O-rings do more harmonic dampening than the mass clamping on the barrel threads. Also these look really nice, great machine work!

Works great. I installed per instructions and tested the same. I shot 3 shot groups and started adjusting out at 0, 2,4,8,10,12 etc. The 8 setting was the best, the groups came together. I have shot it 6 times with the same load and seating depth and every time so far the 8 setting was the best. The 7th time I shot the same held true. I adjusted the powder load up and down 1/10 grain. After going down 1/10g the group size just came together for a .012" group. I am very pleased with this tuner and have installed one on another gun. I still have a lot to learn though.

i recently installed two on benchrest barrels, the 6ppc barrel shot very good after working with it for a while, it placed third place in arecent shoot, with a low .200 agg. thsecond one was on a220db not as much time to work with, but at 200 yds shot several groups in low .300 and shows much promise. am going to order two more today. db

I've been running different tuners for over five years and when I saw this one, I wanted to give it a try. I installed this tuner on a new barrel, After a quick breaking in session I decided to screw the outer section of the tuner all the way out to the end and start from there. (I just like the looks of it screwed out better) I began by firing two shots at each setting and progressively screwed the tuner in toward the rifle stopping at every "marked number", not at each line. My groups quickly began to tighten up into a single holes at 100 yards, after the 8th time I moved the tuner, my two shot groups started opening up again. I moved back to what looked like the best setting and shot a test shot and it went right back into the group. After a good cleaning, I wanted to be sure of the setting with a full test group, I put 6 shots in a hole that measured .122", 4 five shot groups at 200 yards agged .188moa! Excellent repeatability! I shouldn't be surprised, every PMA product I've bought in the past has exceeded my expectations in quality and function. I'm going to get another one of these ordered now!

Now that I have had the tuner installed and tested it to a small degree, I like it even more. Follow the directions, its just that simple. Within ten shots bughole groups.. But there is more, It was installed on a teaser barrel with 900 rounds.. Nice Product Folks.. Guess that's why I just ordered Your new priming tool.. Get stuff from shooters not salesman is my advice..

I have avoided the tuner craze for a long time. I gave in and looked at PMA simply because of how good they were to me once on a gift certificate. The tuner is simple not over complicated like many of the others. Nor is it overly large..